Installation Instructions RSS



How To Install Your GE MWF Refrigerator Water Filter

Okay, so you've received your water filter, now what? Below you'll find our step-by-step installation instructions for your Maytag UKF8001 Refrigerator Water Filter.  Remove the foil seal from your new filter.  Submerge and soak water filter in water for 10-15 minutes.  Twist the old filter a quarter-turn counterclockwise. Pull the old filter straight down, the water will shut off automatically. Make sure the new filter is filled with water before installation.  Insert new filter into the filter up into the fridge until it stops  Turn the filter clockwise approximately one-quarter turn or until turning stops.  Reset your change filter light (if your refrigerator was one) Run water continuously through the refrigerator until 4 gallons have been dispensed. Some noise is...

Continue reading



How To Install Your Maytag UKF8001 Refrigerator Water Filter

Okay, so you've received your water filter, now what! Below you'll find our step-by-step installation instructions for your Maytag UKF8001 Refrigerator Water Filter.  Remove the foil seal from your new filter.  (Optional) - Submerge and soak water filter in water for 10-15 minutes.  Locate the old filter inside the top right side of the refrigerator.  Press or pull the tab to open the refrigerator filter cover by pulling down; the cover will open at an angle.  Rotate the filter one-quarter turn counterclockwise until it detaches and pull straight out. You can now discard this filter.  Insert new filter into the filter compartment so that the threads are aligned at the back.  Turn the filter clockwise approximately one-quarter turn or until...

Continue reading